Will it work with your system?
Works well with
- Adding a zone to the ducts
Check first if you have
- Single-room comfort fixes a sensor could handle
What it controls
The ECOJAY DSUP10 6-Inch Zone Damper is a zone damper.
Zoning splits one system into areas, each with its own thermostat: dampers open and close duct runs and a panel runs the equipment. It's normally designed and installed by an HVAC contractor. Sensors or zoning?
Voltage, per the listing: 24 V.
Also on the listing: a weight of 3.14 lb.
Compatibility and specs
These come from the maker's listing for this exact model; the source of each is marked. Anything the maker leaves out is marked not stated.
| Model number | DSUP10 | Retailer |
|---|---|---|
| Product weight | 3.14 lb | Retailer |
| Voltage | 24 V | Retailer |
Strong points and weak points
Strong points
- 24 V
- Zone damper
Weak points
- Professional installation usually needed
- Check system compatibility first
Wiring and install notes
- Compatibility statements are the maker's own. Confirm with the maker's compatibility checker, turn the power off before wiring, and leave line-voltage and furnace work to a licensed electrician or HVAC technician.
Thermostats to compare it with
FAQ
Can I install the ECOJAY DSUP10 6-Inch Zone Damper myself?
Other zoning and humidity controls with similar wiring
Our take
Shortlist it for adding a zone to the ducts.
Where to get it
The link goes to this exact model's listing. Check that the box includes the trim plate or C-wire adapter you need, and confirm your wiring with the maker's compatibility checker before you order.
Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure